Goodman 2.5 Ton Heat Pump & Gas Furnace 14.5 SEER2 92% 80K BTU Vertical R32

Goodman 2.5 Ton R32 Heat Pump Split System 15.2 SEER2 208/230V 1-Ph GLZS5BA3010

This Energy Star-certified 2.5-ton R-32 split heat pump delivers 30,000 BTU/h of heating and cooling with up to 16 SEER2 efficiency. Featuring a high-efficiency scroll compressor and SmartShift® technology, it ensures quiet, reliable operation. The aluminum fin coil and single-speed PSC condenser fan motor optimize airflow, while factory-installed features like a suction-line accumulator, crankcase heater, and high/low-pressure switches enhance system protection and safety. Its galvanized-steel cabinet resists corrosion and meets 2023 Florida hurricane codes. AHRI Certified and ETL Listed for verified performance and safety.

• Energy Star Certified: Yes
• Heating & Cooling Capacity Nominal: 30000 Btu/H
• Refrigerant Type: R-32
• SEER 2: 15.2
• Unit Height: 39.5 in
• Unit Width: 35.5 in
• Communication Feature Type: Non-Communicating
• Max Overcurrent Protection: 25 A
• Power Phase: 1 Ph
• Power Voltage: 208/230 V
• Compressor Stages: Single Stage
• Compressor Type: Scroll
• Unit Weight: 215 lb
• Tonnage: 2.5
• Model Efficiency: Up to16 SEER2
• Unit Depth: 35.5 in

Key Features

• Efficiency: Rated at 14.5 SEER2 for energy-efficient performance
• Heating: 92% AFUE gas furnace provides efficient whole-home heating
• Capacity: Delivers 30,000 BTU/h as a complete matched system
• Refrigerant: Factory-charged with R32 refrigerant for reliable, eco-conscious operation

Cabinet Features

• Removable Grille-Style Top: Designed to meet UL 60335-2-40 standards.
• Steel Louver Coil Guard: Provides robust coil protection.
• Heavy-Gauge Galvanized-Steel Cabinet: Durable construction for long-lasting use.
• Architectural Gray Powder-Paint Finish: Resistant to corrosion with 500-hour salt-spray approval.
• Maintenance Access: Top and side entry points for convenient servicing.
• Single-Panel Access: Allows for easy control adjustments and accessory installations.
• Hurricane-Resistant Design: Meets 2023 Florida Building Code requirements for hurricane winds when properly anchored (optional anchor bracket kits available).

Goodman R32 92% AFUE Gas Furnace 80,000 BTU Multi-Speed Upflow/Horizontal GR9S920803BN

Upgrade your home heating with the Goodman R32 gas furnace, offering an impressive 92% AFUE efficiency and a robust 80,000 BTU capacity. Designed for versatile installation in upflow or horizontal configurations, this unit features a durable aluminized-steel heat exchanger and a stainless-steel secondary heat exchanger for enhanced performance and longevity. With a multi-speed ECM blower motor, enjoy energy-efficient airflow and minimal noise. Its self-diagnostic control board simplifies maintenance, while compliance with California's low NOx standards ensures eco-friendliness. AHRI certified and ETL listed, this furnace guarantees reliability and safety, making it the perfect choice for efficient home comfort.

• 80,000 BTU
• R32
• Unit Height: 33-3/8 in
• Unit Width: 17-1/2 in
• AFUE: 92 %
• Installation Configuration: Upflow/Horizontal
• Max Overcurrent Protection: 15 A
• Power Phase: 1 Ph
• Power Voltage: 115 V
• Motor Speed Type: Multi Speed ECM
• Unit Weight: 117 lb
• Model Efficiency: 0.92
• Unit Depth: 28 in
• Heat Exchanger Type: Air Cooled
  

Standard Features of R32 Highly Efficient 92% AFUE Gas Furnace

• Heavy-duty Aluminized-Steel Tubular Heat Exchanger: Ensures durability and efficient heat transfer.
• Stainless-Steel Secondary Heat Exchanger: Provides enhanced performance and longevity.
• Single-Stage Gas Valve: Simplifies operation with reliable gas control.
• Durable Silicon Nitride Igniter: Offers consistent ignition performance.
• Multi-Speed ECM Blower Motor: Delivers energy-efficient airflow and improved comfort.
• Quiet Single-Speed Induced Draft Blower: Ensures minimal operational noise.
• Self-Diagnostic Control Board: Facilitates easy troubleshooting and maintenance.
• California Compliance: Meets the 40 ng/J Low NOx emissions standard.
• Installation Restrictions: Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) and San Joaquin Valley Air Pollution Control District (SJVAPCD).
• AHRI Certified & ETL Listed: Guarantees high efficiency and safety standards.
• Multi-Position Installation: Designed for upflow, horizontal left, or right configurations.
• Ventilation Options: Certified for direct vent (2-pipe) or non-direct vent (1-pipe) setups.
• Flexible Venting: Easy-to-install top venting with optional side venting for GR9S92/upflow models.
• Convenient Gas & Electrical Connections: Available on the left or right side for easier installation.

Cabinet Features

• Low Air Leakage: Cabinet air leakage (QLeak) ≤ 2% for energy efficiency.
• Heavy-Gauge Steel Cabinet: Built to withstand wear with a durable finish.
• Insulated Heat Exchanger Cabinet: Foil-faced insulation improves energy efficiency.
• Airtight Bottom or Side Return: Features easy-cut tabs for hassle-free removal in bottom air-inlet applications.

Goodman 3 Ton R32 Evaporator Coil Upflow/Downflow Cased with Built-in TXV CAPTA3626B3

The Goodman 3 Ton R32 Evaporator Coil (CAPTA3626B3) is a compact, cased unit with built-in TXV, optimized for R-32 refrigerant. It offers flexible upflow/downflow installation, durable all-aluminum construction, and rust-resistant drain pan. AHRI certified and ETL listed, it's designed for efficient performance in tight spaces with easy access for maintenance.

• Refrigerant Type: R-32
• Unit Height: 26 in
• Unit Width: 17.5 in
• Cased/Uncased: Cased
• Tonnage: 3.0
• Coil Application: Upflow/Downflow
• Unit Depth: 21 in
  

• R-32 Evaporator Coil
• High-Performance HVAC Solution
• Integrated Thermal Expansion Valves
• Flexible Installation Options
• Foil-Faced Insulation
• Durable Drain Pan
• Galvanized Finish
• AHRI Certified
• ETL Listed

Product Features for High-Performance R-32 Evaporator Coil

• All-Aluminum Construction: Designed for durability and efficient heat exchange, ensuring long-lasting performance in HVAC systems.
• Optimized for R-32 Refrigerant: Specially engineered with circuits and manifolds for efficient cooling and heating applications.
• Integrated Thermal Expansion Valves: Factory-installed in CAPTA and CHPTA models, enhancing efficiency for both cooling and heat pump use.
• Flexible Installation Options: Available in vertical and horizontal configurations, with a compact 21-inch depth for easy access in tight spaces like attics.
• Foil-Faced Insulation: Reduces cabinet condensation, improving overall efficiency and preventing moisture-related issues.
• Durable Drain Pan: Rust-resistant, UV-resistant thermoplastic design with low water retention and additional drainage connections for reliable operation.
• User-Friendly Design: Easy-to-remove drain pan rails simplify maintenance and repositioning of the coil.
• Galvanized Finish: Leather grain-embossed coating ensures durability and resistance to wear and tear.
• Standardized Copper Suction Tube Stub Length: Facilitates easier installation and compatibility with existing systems.
• Single Front Access Panel: Enhances convenience for maintenance on CAPTA and CHPTA models.
• AHRI Certified and ETL Listed: Confirms adherence to industry standards for performance, safety, and reliability.